HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 117
lacp system-priority, Sets the Link Aggregation Control Protocol LACP system priority.
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
DRAFT: BROCADE CONFIDENTIAL lacp system-priority 6 lacp system-priority Synopsis Operands Defaults Command Modes Description Note Usage Guidelines Examples See Also Sets the Link Aggregation Control Protocol (LACP) system priority. lacp system-priority value no lacp system-priority value Specifies the value of the LACP system priority. The range of valid values is 1-65535. The default system-priority value is 32768. Global configuration mode Use this command to set the system priority of a local system. This determines which system is responsible for resolving conflicts in the choice of aggregation groups. Use the no lacp system-priority command to reset the system priority to the default value. Lower numerical values have higher priorities. There are no usage guidelines for this command. To set the LACP system-priority to 68: switch(config)#lacp system-priority 68 To clear the configured LACP system-priority: switch(config)#no lacp system-priority none Converged Enhanced Ethernet Command Reference 99 53-1001762-01