HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 33
exit, command terminates the session.
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
DRAFT: BROCADE CONFIDENTIAL exit 2 exit Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Exits the current mode and returns to the previous mode. exit none There are no default configurations for this command. All command modes Use this command to exit the current mode, and return to the previous mode. When used in EXEC and Privileged EXEC modes, the exit command terminates the session. There are no usage guidelines for this command. To exit the Interface configuration mode, and return to the Configuration mode: switch(config)#interface tengigabitethernet 0/0 switch(conf-if-te-0/0)#exit switch(config)#exit end, enable, disable Converged Enhanced Ethernet Command Reference 15 53-1001762-01
Converged Enhanced Ethernet Command Reference
15
53-1001762-01
exit
2
DRAFT: BROCADE CONFIDENTIAL
exit
Exits the current mode and returns to the previous mode.
Synopsis
exit
Operands
none
Defaults
There are no default configurations for this command.
Command
Modes
All command modes
Description
Use this command to exit the current mode, and return to the previous mode. When used in EXEC
and Privileged EXEC modes, the
exit
command terminates the session.
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To exit the Interface configuration mode, and return to the Configuration mode:
switch(config)#
interface tengigabitethernet 0/0
switch(conf-if-te-0/0)#
exit
switch(config)#
exit
See Also
end
,
enable
,
disable