HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 226
show qos flowcontrol interface
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
DRAFT: BROCADE CONFIDENTIAL 12 show qos flowcontrol interface show qos flowcontrol interface Synopsis Operands Command Modes Description Usage Guidelines Examples See Also Displays all of the configured flow control information for an interface. show qos flowcontrol interface {tengigabitethernet slot/port | linecard slot | portset chip | all} tengigabitethernet slot port linecard portset slot chip all Reports QoS flow control statistics for a single 10 Gbps Ethernet interface. Specifies the 10 Gbps Ethernet linecard slot number within the chassis. Specifies the 10 Gbps Ethernet port number within the linecard. Reports the QoS flow control statistics for all 10 Gbps Ethernet interfaces within an ASIC. Specifies the ASIC linecard slot number within the chassis. Specifies the ASIC number within the linecard. Reports QoS flow control statistics for all interfaces within the system. EXEC mode Use this command to display all of the configured flow control information for a specific interface. Use this command to display the runtime state retrieved from the dataplane reflecting the operation of 802.3x pause or Priority Flow Control (PFC) on an interface. The administrative state for pause generation and reception or processing is presented for the interface (802.3x mode) or for each CoS (PFC mode). TX_Pause frame generation statistics are always presented for the interface. The RX_Pause BitTimes is presented for the interface (802.3x mode) or for each CoS (PFC mode). When PFC is deployed under the CEE Provisioning model, then the command reports whether the Data Center Bridging eXchange protocol (DCBX) has overridden the user configuration, for example when the DCBX detects a mis-configuration between CEE peers, it disables PFC operationally. To display all of the configured flow control information for a 10 Gbps Ethernet interface: switch#show qos flowcontrol interface tengigabitethernet 0/1 Interface TenGigabitEthernet 0/1 Mode PFC DCBX enabled for PFC negotiation TX 0 frames TX TX RX RX Output Paused CoS Admin Oper Admin Oper 512 BitTimes 0 Off Off Off Off 0 1 Off Off Off Off 0 2 On Off On Off 0 3 Off Off Off Off 0 4 Off Off Off Off 0 5 Off Off Off Off 0 6 Off Off Off Off 0 7 Off Off Off Off 0 show qos interface, show cee maps 208 Converged Enhanced Ethernet Command Reference 53-1001762-01