HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 195
ip igmp static-group
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
DRAFT: BROCADE CONFIDENTIAL ip igmp static-group 10 ip igmp static-group Synopsis Configures the static group membership entries. ip igmp static-group A.B.C.D {interface tengigabitethernet slot/port|interface port-channel number} no ip igmp static-group A.B.C.D {interface tengigabitethernet slot/port|interface port-channel number} Operands Description Defaults Command Modes A.B.C.D Specifies the group address, as a subnet number in dotted decimal format (for example, 10.0.0.1), as the allowable range of addresses included in the multicast group. interface Use this keyword to specify any of the following interfaces: tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. port-channel number Specifies the interface is a port-channel. The range of valid values is 1-63. Using ip igmp static-group, packets to the group are fast-switched out of the interface, providing that the packets were received on the correct reverse path forwarding (RPF) interface. Static group membership entries are automatically added to the IGMP cache and mroute table. There are no defaults for this command. Privileged EXEC Mode User Guidelines Example See Also There are no user guidelines for this command. none none Converged Enhanced Ethernet Command Reference 177 53-1001762-01