HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 52

show startup-config, An error displays if there are no entries in the startup configuration file

Page 52 highlights

2 show startup-config DRAFT: BROCADE CONFIDENTIAL show startup-config Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Displays the content of the startup configuration file. show startup-config none There are no default configurations for this command. Privileged EXEC mode Use this command to display the contents of the startup configuration file. The following guidelines apply when using this command: • An error displays if there are no entries in the startup configuration file, for example switch#show startup-config % No Startup-config • Use the write memory command to add entries to the startup configuration file. • Using the write erase command to delete entries from startup configuration file. To show the content of the startup configuration file: switch#show startup-config ! no protocol spanning-tree ! interface Vlan 1 ! interface TenGigabitEthernet 0/0 shutdown ! interface TenGigabitEthernet 0/1 shutdown ! interface TenGigabitEthernet 0/2 shutdown ! interface TenGigabitEthernet 0/3 shutdown write memory, write erase 34 Converged Enhanced Ethernet Command Reference 53-1001762-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252

34
Converged Enhanced Ethernet Command Reference
53-1001762-01
show startup-config
2
DRAFT: BROCADE CONFIDENTIAL
show startup-config
Displays the content of the startup configuration file.
Synopsis
show startup-config
Operands
none
Defaults
There are no default configurations for this command.
Command
Modes
Privileged EXEC mode
Description
Use this command to display the contents of the startup configuration file.
Usage
Guidelines
The following guidelines apply when using this command:
An error displays if there are no entries in the startup configuration file, for example
switch#
show startup-config
% No Startup-config
Use the
write memory
command to add entries to the startup configuration file.
Using the
write erase
command to delete entries from startup configuration file.
Examples
To show the content of the startup configuration file:
switch#
show startup-config
!
no protocol spanning-tree
!
interface Vlan 1
!
interface TenGigabitEthernet 0/0
shutdown
!
interface TenGigabitEthernet 0/1
shutdown
!
interface TenGigabitEthernet 0/2
shutdown
!
interface TenGigabitEthernet 0/3
shutdown
See Also
write memory
,
write erase