HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 37
line vty, Synopsis, Operands, Defaults, Command, Modes, Description, Usage, Guidelines, Examples
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
DRAFT: BROCADE CONFIDENTIAL line vty 2 line vty Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Configures the virtual terminal line setting to allow you to set the wait time interval for the Telnet session to time out. line vty first number last number first number last number Specifies the first line number. The range of valid values is 0-31. Specifies the last line number. The range of valid values is 0-31. There are no default configurations for this command. Global configuration mode Use this command to configure the virtual terminal line settings to set the exec-timeout. There are no usage guidelines for this command. To configure the wait interval for the telnet session to time out after 2 minutes, 30 seconds if there is no response from the user: switch#configure terminal switch(config)#line vty 23 31 switch(conf-line)#exec-timeout 2 30 show line Converged Enhanced Ethernet Command Reference 19 53-1001762-01