HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 24
copy startup-config, The following guidelines apply when using this command
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
2 copy startup-config DRAFT: BROCADE CONFIDENTIAL copy startup-config Synopsis Operands Copies the startup configuration file to a network server or a file URL. copy startup-config destination-file-url destination-file-url FLASH FTP SCP running-config Specifies the destination path to which the startup-config is to be copied using the following formats: Copies to URL [flash://]filename Copies to URL ftp://[username[:password]@server/path] Copies to URL scp://[username[:password]@server/path] Copies to the current running configuration. Defaults Command Modes Description Usage Guidelines Examples See Also There are no default configurations for this command. Privileged EXEC mode Use this command to copy the startup configuration file to a network server or a file URL. The following guidelines apply when using this command: • An error displays if there is no startup configuration file, for example: switch #copy startup-config file2 % Error: No Startup-config. • Use the write memory command to add entries in the startup configuration file. • Use the write erase command to delete entries from the startup configuration file. To copy the startup configuration file to the local switch: switch#copy startup-config file2 Building configuration... switch#copy startup-config flash://file2 Building configuration... To copy the startup configuration file to a remote server through FTP: switch#copy startup-config ftp://[email protected]/file2 Source password[]? Building configuration... To copy the startup configuration file to a remote server through SCP: switch#copy startup-config scp://[email protected]/file2 Source password[]? Building configuration... write erase, copy running-config 6 Converged Enhanced Ethernet Command Reference 53-1001762-01