HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 197
show ip igmp groups, Specifies which VLAN interface to display the snooping configuration related
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
DRAFT: BROCADE CONFIDENTIAL show ip igmp groups 10 show ip igmp groups Synopsis Displays information related to learned groups in the IGMP protocol module. show ip igmp groups [A.B.C.D |detail [[interface tengigabitethernet slot/port |detail]|[interface port-channel number |detail]| [interface vlan vlan_id |detail]]] Operands Defaults Command Modes Description Usage Guidelines Examples See Also A.B.C.D Specifies the group address, as a subnet number in dotted decimal format (for example, 10.0.0.1), as the allowable range of addresses included in the multicast group. detail Displays the IGMPv3 source information. interface Use this keyword to specify any of the following interfaces: tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. detail Displays the IGMPv3 source information. interface Use this keyword to specify any of the following interfaces: vlan vlan_id Specifies which VLAN interface to display the snooping configuration related information. The range of valid values is 1-3583. detail Displays the IGMPv3 source information. interface Use this keyword to specify any of the following interfaces: port-channel number Specifies the interface is a port-channel. The range of valid values is 1-63. detail Displays the IGMPv3 source information. There are no defaults for this command. Privileged EXEC mode Use this command to display the IGMP database, including configured entries for either all groups on all interfaces, or all groups on specific interfaces, or specific groups on specific interfaces. There are no usage guidelines for this command. none none Converged Enhanced Ethernet Command Reference 179 53-1001762-01