HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 145
clear spanning-tree counter, To clear spanning-tree counters for all interfaces
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
DRAFT: BROCADE CONFIDENTIAL clear spanning-tree counter 9 clear spanning-tree counter Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Clears all spanning-tree counters on the interface. clear spanning-tree counter [interface| port-channel number | tengigabitethernet slot/port] interface Specifies the interface on which to clear the spanning-tree counters. port-channel number Specifies the port-channel number. The range of valid values is 1-63. tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. There are no default configurations for this command. Privileged EXEC mode Use this command to clear the spanning-tree counters on the interface. If the interface operand is not specified, spanning-tree counters are cleared for all interfaces. To clear spanning-tree counters for all interfaces: switch#clear spanning-tree counter To clear spanning-tree counters for a 10 Gbps Ethernet interface: switch#clear spanning-tree counter interface tengigabitethernet 0/1 To clear spanning-tree counters for port-channel 23: switch#clear spanning-tree counter interface port-channel 23 show spanning-tree Converged Enhanced Ethernet Command Reference 127 53-1001762-01