HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 243
dot1x timeout server-timeout, Synopsis, Operands, Defaults, Command, Modes, Description, Usage
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 243 highlights
DRAFT: BROCADE CONFIDENTIAL dot1x timeout server-timeout 13 dot1x timeout server-timeout Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Sets the authentication sever response timeout. dot1x timeout server-timeout seconds seconds Specifies the number of seconds that a switch waits for the transmission of packets by the switch to the authentication server. The range of valid values is 1-65535. The default timeout is 30 seconds. Interface configuration mode Use this command to set the authentication sever response timeout. There are no usage guidelines for this command. To set 40 seconds as the switch-to-authentication server transmission time: switch(config)#interface tengigabitethernet 0/1 switch(config-if)#dot1x timeout server-timeout 40 none Converged Enhanced Ethernet Command Reference 225 53-1001762-01