HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 67
switchport access, Use this command to set the Layer 2 interface as access. In access mode
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
DRAFT: BROCADE CONFIDENTIAL switchport access 3 switchport access Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Sets the Layer 2 interface as access. switchport access vlan vlan_id no switchport access vlan vlan vlan_id Sets the port VLAN (PVID) to the specified vlan_id. The range of valid values is 1-3583. By default, all Layer 2 interfaces are in access mode and belong to the VLAN ID 1. Interface configuration mode Use this command to set the Layer 2 interface as access. In access mode, the interface only allows untagged and priority tagged packets. Use the no switchport access vlan command to set the PVID to the default VLAN 1. There are no usage guidelines for this command. To set the Layer 2 interface PVID to 100: switch(conf-if-te-0/19)#switchport access vlan 100 show vlan brief, show interface switchport, switchport mode, switchport trunk Converged Enhanced Ethernet Command Reference 49 53-1001762-01