HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 75
Interface Commands, clear counters
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
DRAFT: BROCADE CONFIDENTIAL Interface Commands Chapter 4 clear counters Synopsis Operands Description Defaults Command Modes User Guidelines Example Clears statistics on all interfaces on the switch. clear counters {all | access-list mac access_list_name | [interface port-channel number | tengigabitethernet slot/port | slot-id number] } all Specifies to clear statistics on all interfaces. access-list mac access_list_name Specifies the name of the MAC access list. interface Use this keyword to specify any of the following interfaces: port-channel number Specifies the port-channel number. The range of valid values is 1-63. tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. slot-id number Specifies the slot number of the linecard. For the Brocade 8000 switch, the slot number is always 0 (zero). Use this command to clear statistics on one or on all interfaces. There are no default configurations for this command. Privileged EXEC mode The clear counters all command does not clear counters for any of the protocol daemon stats like LLDP, LACP, MSTP, and so on. To clear the statistics for 10 Gbps Ethernet interface 0/1: switch#clear counters interface tengigabitethernet 0/1 To clear the statistics for MAC access list named "test": switch#clear counters access-list mac test To clear the statistics for all the interfaces on the linecard in slot 0 (zero): switch#clear counters slot-id 0 Converged Enhanced Ethernet Command Reference 57 53-1001762-01