HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 127
Layer 2 ACL commands, clear counters access-list mac
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
DRAFT: BROCADE CONFIDENTIAL Layer 2 ACL commands Chapter 8 clear counters access-list mac Synopsis Operands. Defaults Command Modes Description Usage Guidelines Example See Also Clears all the Media Access Control (MAC) ACL counters for all interfaces which have ACL applied on them or for a specific interface. clear counters access-list mac name [interface |port-channel number | tengigabitethernet slot/port| vlan vlan_id] name Specifies the name of the MAC ACL. interface Use this keyword to specify any of the following interfaces: tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. port-channel number Specifies the port-channel number. The range of valid values is 1-63. vlan vlan_id Specifies the VLAN number. The range of valid values is 1-3583. There are no default configurations for this command. Privileged EXEC mode Use this command to clear counters for all or for a specific interface for MAC access list counters. If the interface keyword is not specified, then ACL counters on all interfaces which have this ACL applied are cleared. There are 255 ACL counters supported per port group. To clear counters for the configured MAC access list named test on an interface: switch#clear counters access-list mac test interface tengigabitethernet 0/1 To clear counters for the configured MAC access list named test on all interfaces on which this ACL is applied: switch#clear counters access-list mac test show mac access-list, show statistics access-list Converged Enhanced Ethernet Command Reference 109 53-1001762-01