HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 71
vlan classifier activate group, command to remove the specified group.
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
DRAFT: BROCADE CONFIDENTIAL vlan classifier activate group 3 vlan classifier activate group Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Activates a VLAN classifier group. vlan classifier activate group number vlan vlan_id no vlan classifier activate group number vlan vlan_id Specifies which VLAN classifier group to activate. The range of valid values is 1-16. Specifies which VLAN interface to activate. The range of valid values is 1-3583. There are no default configurations for this command. Interface configuration mode Use this command to activate a VLAN classifier group for a specified VLAN. Use the no vlan classifier activate group command to remove the specified group. There are no usage guidelines for this command. To activate VLAN classifier group 1 for VLAN 5: switch-cmsh(conf-if-te-0/10)#vlan classifier activate group 1 vlan 5 none Converged Enhanced Ethernet Command Reference 53 53-1001762-01