HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 241

DRAFT: BROCADE CONFIDENTIAL dot1x reauthMax 13 dot1x reauthMax Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Sets the maximum number of times that a port attempts to reauthenticate. dot1x reauthMax number no dot1x reauthMax number Specifies the maximum number of reauthentication attempts before the port goes to the unauthorized state. The range of valid values is 1-10. The default number of times that a port attempts authentication is two. Interface configuration mode Use this command to set the maximum number of times that a port attempts to reauthenticate before a port changes to the unauthorized state. Use the no dot1x reauthMax command to return to the default setting. There are no usage guidelines for this command. To set the maximum number of reauthentication attempts to 5: switch(config)#interface tengigabitethernet 0/1 switch(conf-if-te-0/1)#dot1x reauthMax 5 To set the reauthentication maximum to the default value: switch(config)#interface tengigabitethernet 0/1 switch(conf-if-te-0/1)#no dot1x reauthMax none Converged Enhanced Ethernet Command Reference 223 53-1001762-01