HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 136
permit (standard ACLs), Synopsis, permit, count, no permit, Operands, Defaults, Command, Modes
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
8 permit (standard ACLs) DRAFT: BROCADE CONFIDENTIAL permit (standard ACLs) Synopsis Operands Defaults Command Modes Description Usage Guidelines Example See Also Configures a MAC address rule to permit traffic based on the source MAC address. permit {MAC_ACL | any} [count] no permit {MAC_ACL | any} MAC_ACL any count Specifies the source host MAC address for which to set permit conditions. Use the format HHHH.HHHH.HHHH. Specifies any source MAC address. Enables the counting of the packets matching the rule. By default, no MAC ACLs are configured. Feature Access Control List Configuration mode Use this command to configure rules to match and to permit traffic based on the source MAC address. You can also enable counters for a specific rule. There are 255 ACL counters supported per port group. Use the no permit command to remove a rule from the MAC ACL. There are no usage guidelines for this command. To create a rule in a MAC standard ACL to permit traffic from the source MAC address 0022.3333.4444 and to enable the counting of packets: switch(conf-macl-std)#permit 0022.3333.4444 count To delete a rule from a MAC standard ACL: switch(conf-macl-std)#no permit 0022.3333.4444 mac-access-list extended, no seq 118 Converged Enhanced Ethernet Command Reference 53-1001762-01