HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 204

11 rmon event DRAFT: BROCADE CONFIDENTIAL rmon event Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Adds or removes an event in the RMON event table associated to the RMON alarm number. rmon event index [description word] [log] [owner name] [trap word] no rmon event index [description word] [log] [owner name] [trap word] index description word log owner name trap word Specifies the RMON event number. The range of valid values is 1-65535. Specifies a description of the event. Generates an RMON log when an event is triggered. Specifies the owner of the event. The maximum number of characters is 32. Specifies the SNMP community or string name to identify this trap. There are no events configured. Global configuration mode Use this command to add or remove an event in the RMON event table that is associated with an RMON alarm number. Use the no rmon event command to remove the event configuration. There are no usage guidelines for this command. To configure an RMON event: switch(config)#rmon event 2 log description "My Errorstoday" owner gjack show rmon events 186 Converged Enhanced Ethernet Command Reference 53-1001762-01