HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 245

dot1x timeout tx-period, Synopsis, Operands, Defaults, Command, Modes, Description, Usage, Guidelines

Page 245 highlights

DRAFT: BROCADE CONFIDENTIAL dot1x timeout tx-period 13 dot1x timeout tx-period Synopsis Operands Defaults Command Modes Description Usage Guidelines Examples See Also Sets the number of seconds that the switch waits for a response to an Extensible Authentication Protocol (EAP) request or identity frame from the client before retransmitting the request. dot1x timeout tx-period seconds seconds Specifies the time in seconds between successive request ID attempts. The range of valid values is 1-65535. The default timeout is 30 seconds. Interface configuration mode Use this command to set the interval between successive attempts to request an ID (EAP ID Req). There are no usage guidelines for this command. To set 34 as the number of seconds to wait for a response to an EAP-request or identity frame from the client before retransmitting the request: switch(config)#interface tengigabitethernet 0/1 switch(config-if)#dot1x timeout tx-period 34 none Converged Enhanced Ethernet Command Reference 227 53-1001762-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252

Converged Enhanced Ethernet Command Reference
227
53-1001762-01
dot1x timeout tx-period
13
DRAFT: BROCADE CONFIDENTIAL
dot1x timeout tx-period
Sets the number of seconds that the switch waits for a response to an Extensible Authentication
Protocol (EAP) request or identity frame from the client before retransmitting the request.
Synopsis
dot1x timeout tx-period
seconds
Operands
seconds
Specifies the time in seconds between successive request ID attempts. The
range of valid values is 1-65535.
Defaults
The default timeout is 30 seconds.
Command
Modes
Interface configuration mode
Description
Use this command to set the interval between successive attempts to request an ID (EAP ID Req).
Usage
Guidelines
There are no usage guidelines for this command.
Examples
To set 34 as the number of seconds to wait for a response to an EAP-request or identity frame from
the client before retransmitting the request:
switch(config)#
interface tengigabitethernet 0/1
switch(config-if)#
dot1x timeout tx-period 34
See Also
none