HP 8/80 Converged Enhanced Ethernet Command Reference v6.4.0 (53-1001762-01, J - Page 142
show statistics access-list mac, tengigabitethernet 0/1 and VLAN 100
View all HP 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
DRAFT: BROCADE CONFIDENTIAL 8 show statistics access-list mac show statistics access-list mac Synopsis Operands Defaults Command Modes Description Examples See Also Shows active ACL rules in the switch and if the rules have counters enabled. show statistics access-list mac name [interface port-channel number | tengigabitethernet slot/port | vlan vlan_id] name Specifies a unique name for the MAC ACL. interface Specifies the interface for which to display the statistics. port-channel number Specifies the port-channel number. The range of valid values is 1-63. tengigabitethernet Specifies a valid 10 Gbps Ethernet interface. slot Specifies a valid slot number. port Specifies a valid port number. vlan vlan_idSpecifies the VLAN number. The range of valid values is 1-3583. There are no default configurations for this command. EXEC mode Use this command to display the active rules on the switch and whether those rules have counters enabled. To display the statistics for standard and extended MAC ACL applied on two interfaces tengigabitethernet 0/1 and VLAN 100: switch#show statistics access-list mac std_acl mac access-list standard std_acl on interface Te 0/1 seq 10 deny 0011.2222.3333 count (6312 frames) seq 20 deny 0011.2222.4444 count (20 frames) seq 30 deny 0011.2222.5555 seq 40 deny 0011.2222.6666 count (100000 frames) switch#show statistics access-list mac ext_acl mac access-list extended ext_acl on interface Vl 100 seq 10 deny 0011.2222.2222 0022.2222.2222 ipv4 count (4350 frames) seq 20 deny 0011.2222.2222 0022.2222.2222 fcoe count (0 frames) seq 30 deny 0011.2222.2222 0022.2222.2222 arp seq 40 deny 0011.2222.2222 0022.2222.2222 10000 count (560 frames) If the rule is not written into the hardware the output displays as shown below: seq 8 permit 00c0.e000.0080 count (unwritten) If the rule is written into the hardware, but the counters are not enabled for that rule, the output displays as shown below: seq 9 permit 00c0.e000.0090 count (uncounted) show running-config, show mac access-group 124 Converged Enhanced Ethernet Command Reference 53-1001762-01