HP CP6015dn Service Manual - Page 109

Configure a tray by using the Paper Handling menu You can also configure the trays for type and size without a prompt from the product. 1. Press Menu. 2. Press the down arrow to highlight PAPER HANDLING, and then press the checkmark button . 3. Press the down arrow to highlight the size or type setting for the desired tray, and then press the checkmark button . 4. Press the up arrow or the down arrow to highlight the size or type. If you select a custom size, select the unit of measure, and then use the numeric keypad to set the X dimension and the Y dimension. 5. Press the checkmark button to save your selection. 6. Press the back arrow . 7. Press the back arrow again. Automatic media type sensing (auto sense mode) The automatic media type sensor functions only when that tray is configured to ANY TYPE. Configuring a tray to any other type, such as Bond or Glossy, deactivates the media sensor in that tray. The HP Color LaserJet CP6015 Series printers can automatically classify many paper types into one of the following categories: ● Plain ● Transparency ● Glossy ● Glossy film (tough paper) ● Heavy For more control, a specific type must be selected in the job or configured in a tray. Auto-sense settings Full sensing ● The product recognizes plain and heavy paper, transparencies, glossy paper, and tough paper. ● The product stops every page to sense the type. ● This is the slowest mode. ● Only available for Tray 1 Expanded sensing (default) ● The product recognizes plain and heavy paper, transparencies, glossy paper, and tough paper. ● Each time the product begins a print job, it stops the first page to sense the type. ENWW Configure trays 67