HP CP6015dn Service Manual - Page 449
For Tray X Tray Size Cannot Be Any, Card Slot <x> Not Functional
UPC - 883585363018
View all HP CP6015dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 449 highlights
Table 7-4 Control-panel messages (continued) Control panel message Description Recommended action If this message persists, contact an HPauthorized service or support provider. (See the HP Support flyer, or go to www.hp.com/ support/cljcp6015.) FULL Remove all paper from bin The specified output bin is full. Empty bin and continue printing. Output bins include the standard top bin, and, if you have an optional paper handling device, the upperleft bin, middle-left bin, lower-left bin, or lower-booklet bin ACTION NOT CURRENTLY AVAILABLE FOR TRAY X TRAY SIZE CANNOT BE ANY SIZE/ANY CUSTOM Canceling... The user attempted to set the registration for a tray that is set to ANY SIZE or ANY CUSTOM. Duplex registration is not available when the size is set to ANY SIZE or ANY CUSTOM. Configure the tray to a specific size, and then set the registration for that tray. BAD DUPLEXER CONNECTION The duplexer is not functioning correctly. 1. Reconnect the connectors for the duplexing driver PCA (J4101), intermediate (J1902), and the DC controller PCA (J133). 2. Replace the duplexing reverse unit. See Duplexing reverse unit on page 290. BAD OPTIONAL TRAY CONNECTION The optional tray is not connected. 1. Turn the product off. 2. Remove and then reinstall optional tray or trays. 3. Reinstall the IPTU. 4. Reconnect the connectors for the IPTU driver PCA (J7001) and the DC controller PCA (J130). 5. Replace the IPTU driver PCA. IPTU driver PCA on page 663. Calibrating... Displays during calibration. No action is necessary. CALIBRATION RESET PENDING For help press (Help button) A calibration reset will occur when all jobs are To initiate the reset sooner, cancel all jobs by processed. pressing the STOP button. PROCESSING... CARD SLOT NOT FUNCTIONAL For help press (Help button) The compact flash card in slot is not working correctly. Remove the card from the slot indicated, and replace with a new card. CARD SLOT DEVICE FAILURE The specified device has failed. Press the checkmark button to clear. To clear press (Checkmark button) CARD SLOT FILE OPERATION FAILED To clear press (Checkmark button) A PJL file system command attempted to perform an illogical operation. Press the checkmark button to clear. CARD SLOT FILE SYSTEM IS FULL To clear press (Checkmark button) A PJL file system command could not store Press the checkmark button something on the file system because the file system was full. to clear. CARD SLOT IS WRITE PROTECTED The file system device is protected and no new files can be written to it. Press the checkmark button to clear. ENWW Control-panel messages 407