HP CP6015dn Service Manual - Page 686

Table 8-12 Specifications for booklet making (Booklet maker only) (continued) Item Specifications Position adjustment Power supply Provided From stacker unit (24VDC) Figure 8-97 Staple and folding position Paper Size A3 B4 A4R LDR LGL LTR-R L1 88.5mm 68.5mm 45.0mm 79.7mm 48.0mm 48.0mm L2 208.5mm 188.5mm 165.0mm 199.7mm 168.0mm 168.0mm L3 210.0mm 182.0mm 148.5mm 216.0mm 177.8mm 139.7mm L1 -/+2 mm L2 -/+2 mm L3 -/+1 mm Stapler/stacker output-bin capacities The actual capacities of the stapler/stacker output bins vary from 100 sheets, to 500 sheets, to 1,000 sheets of plain paper, depending on the bin. However, the stapler/stacker has been designed to accept only 30 staple jobs at one time, regardless of the number of pages in each job. Therefore, customers may see an OUTPUT BIN FULL message on the control panel long before the individual output bin is at full capacity. Table 8-13 Stapler/stacker output-bin capacities Output bin Actual capacity of output bin Number of staple jobs accepted Bin capacity for staple jobs Top output bin 100 sheets of plain paper1 30 staple jobs, regardless of 30 staple jobs, or 100 sheets size (whichever comes first) Output-bin 1 500 sheets of plain paper1 30 staple jobs or 500 sheets (whichever comes first) Output-bin 2 (stacker bin) 1,000 sheets of plain paper1 1 Based on 75 g/m2 (20 lb) paper 30 staple jobs or 1,000 sheets (whichever comes first) Example scenario: A customer sends 40 staple jobs to the accessory with each job consisting of just two sheets (40 jobs x 2 sheets = 80 total sheets). Because the capacity of the stacker output bin is 1,000 sheets, the customer expects the 80-sheet job to output without issue. However, the stacker bin sends an OUTPUT BIN FULL message to the control panel at the end of 30 jobs (30 jobs x 2 sheets = 60 total sheets). The actual full capacity of the output bin is 1,000 sheets, but 644 Chapter 8 Output accessories and intermediate paper-transfer unit (IPTU) ENWW