HP CP6015dn Service Manual - Page 416
Load Tray <xx> [type} [size], 5 Unexpected Type In Tray <xx>
UPC - 883585363018
View all HP CP6015dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 416 highlights
Table 7-4 Control-panel messages (continued) Control panel message Description Recommended action To continue press button) (Checkmark Check the host configuration. 40 BAD EIO X TRANSMISSION The connection between the product and the EIO card in the specified slot has been broken. Press the checkmark button to clear the error message and continue printing. Try to reinstall the EIO card. 40 BAD SERIAL TRANSMISSION To continue press button) (Checkmark A serial data error (parity, framing, or line Press the checkmark button to clear the overrun) occurred as data was being sent by error message. (Data will be lost.) the computer. 40 EMBEDDED I/O BAD TRANSMISSION A temporary printing error has occurred. To continue press button) (Checkmark Press the checkmark button to clear the error message. (Data will be lost.) 41.3 UNEXPECTED SIZE IN TRAY For help press (Help button) The product detected a different paper size than expected. Following the instructions on the screen, load the tray with the size and type of paper indicated, or use another tray. LOAD TRAY [TYPE] [SIZE] To use another tray press button) (Checkmark To use another tray press the checkmark button . 41.3 UNEXPECTED SIZE IN TRAY For help press (Help button) The product detected a different paper size Load the tray with the size and type of paper than expected. indicated, or use another tray. LOAD TRAY [TYPE} [SIZE] To use another tray press button) (Checkmark 41.5 UNEXPECTED TYPE IN TRAY For help press (Help button) The product detected a different paper type than expected. LOAD TRAY [TYPE] [SIZE] To use another tray press button) (Checkmark Load the tray with the size and type of paper indicated, or use another tray if available. If the error persists: 1. Reinstall the ITB unit. 2. Reconnect the connectors for the media sensor (J901), intermediate-transfer belt (J1962, J2701, and J2702), and the DC controller PCA (J116). 3. Replace the ITB unit. See Intermediate transfer belt (ITB) unit on page 147. 41.7 ERROR To continue touch OK. . Paper was late arriving at the registration Press the Help button to see details. area and almost caused a paper jam. If this error reappears, use different media. To clear, press the checkmark button . If the error persists, turn the product off then on. See Paper-handling problems on page 428. 41. ERROR A temporary printing error has occurred. Press the Help button to see details. For help press (Help button) To continue press button) (Checkmark 374 Chapter 7 Solve problems ENWW