HP CP6015dn Service Manual - Page 415
Control panel message, Description, Recommended action, CAUTION, JJ.NT JAM IN TRAY <X>
UPC - 883585363018
View all HP CP6015dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 415 highlights
Table 7-4 Control-panel messages (continued) Control panel message Description Recommended action 13.JJ.NT JAM IN RIGHT DOOR A jam has occurred in the duplex and feed 1. area inside the right door. See Jam locations on page 429. 2. Open the right door. Clear all paper. 3. Close the right door. 13.JJ.NT JAM IN TOP COVER A jam has occurred in the top cover. See Jam 1. locations on page 429. 2. Open the top cover. Clear all paper. 3. Close the top cover. 13.JJ.NT JAM IN TRAY 1 A jam has occurred in Tray 1. See Jam locations on page 429. 1. Clear all paper from Tray 1. 2. Press the checkmark button . 13.JJ.NT JAM IN TRAY A jam has occurred in the indicated tray. See 1. Jam locations on page 429. 2. Open the indicated tray. Clear all paper. 3. Press the checkmark button . 13.JJ.NT TRANSFER AND FUSER JAM A jam has occurred inside the right door in the CAUTION: The fuser can be hot while the transfer or fuser area. See Jam locations product is in use. Wait for the fuser to cool on page 429. before handling it. 1. Open the right door. 2. Open the transfer-access panel and clear all paper found. 3. Remove the fuser and clear all paper found. 4. Reinstall the fuser and close the transfer-access panel. 5. Close the right door. 13.JJ.NT TRANSFER AREA JAM A jam has occurred inside the right door in the 1. image transfer area. See Jam locations on page 429. 2. Open the right door. Open the transfer-access panel. 3. Clear all paper found. 4. Close the transfer-access panel. 5. Close the right door. 20 INSUFFICIENT MEMORY To continue press button) (Checkmark The product received more data than can fit in the available memory. You might have tried to transfer too many macros, soft fonts, or complex graphics. Press the checkmark button to print the transferred data (some data might be lost), and then simplify the print job or install additional memory. 22 EIO X BUFFER OVERFLOW To continue press button) (Checkmark Too much data was sent to the EIO card in the specified slot (x). An incorrect communications protocol might be in use. Press the checkmark button to print the transferred data. (Some data might be lost.) 22 EMBEDDED I/O BUFFER OVERFLOW To continue press button) (Checkmark Too much data was sent to the embedded HP Jetdirect print server. Press the checkmark button to print the transferred data. (Some data might be lost.) 22 USB I/O BUFFER OVERFLOW The product's USB buffer has overflowed. Press the checkmark button to print the transferred data. (Some data might be lost.) ENWW Control-panel messages 373