HP LaserJet Pro M1132s User Guide - Page 153

Fax error messages Alert and warning messages appear temporarily and might require you to acknowledge the message by pressing the OK button to resume or by pressing the Cancel button to cancel the job. With certain warnings, the job might not complete or the print quality might be affected. If the alert or warning message is related to printing and the auto-continue feature is on, the product will attempt to resume printing the job after the warning has appeared for 10 seconds without acknowledgement. Alert and warning messages Control panel message Comm. error Fax delayed Send memory full Fax is busy Canceled send Description Recommended action A fax communication error occurred between the product and the sender or receiver. Allow the product to retry sending the fax. Unplug the product telephone cord from the wall, plug in a telephone, and try making a call. Plug the product phone cord into a jack for another phone line. Try a different phone cord. If the error persists, contact HP. See www.hp.com/support/ljm1210series or the support flyer that came in the product box. Fax memory is full. Cancel the fax by pressing the Cancel button. Resend the fax. You might need to send the fax in multiple sections if the error occurs again. The fax line to which you were sending a fax was busy. The product has canceled sending the fax. Call the recipient to ensure that the fax machine is on and ready. Check that you are dialing the correct fax number. Check that the Redial if busy option is enabled. Check for a dial tone on the phone line by pressing the Send Fax button. Make sure that the phone is working by disconnecting the product, plugging in a telephone to the phone line, and making a voice call. Plug the product phone cord into a jack for another phone line, and then try sending the fax again. Try a different phone cord. If the error persists, contact HP. See www.hp.com/support/ljm1210series or the support flyer that came in the product box. ENWW Solve fax problems 139