HP ML330 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide - Page 22
System Configuration Switch, Table 1-7
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Component Identification System Configuration Switch CAUTION: Clearing nonvolatile RAM (NVRAM) deletes the system configuration. Refer to Chapter 5, "Server Configuration and Utilities," for instructions on configuring the server. Table 1-7: System Configuration Switch Settings Position Default Description Status 1 Off Reserved - 2 Off Lock configuration Off = Configuration can be changed On = Configuration is locked 3 Off Tower/rack configuration Off = Tower configuration On = Rack configuration 4 Off Diskette boot Off = Server uses RBSU diskette boot selection On = User can override RBSU diskette boot selection and boot from diskette 5 Off Password override Off = Password protection is active On = User can override password 6 Off Clear CMOS and NVRAM Off = No function On = Server configuration is erased at power-up 7 Off Reserved - 8 Off Reserved - Note: Switch positions 1, 7, and 8 are reserved for authorized service providers only. HP ProLiant ML330 Generation 3 Server Setup and Installation Guide 1-9