HP ML330 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide - Page 77
Server Passwords, bypassed, allowing the server to start.
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Server Configuration and Utilities Server Passwords The Server Passwords menu configures the password environment of the server. The available options are as follows: • Set Admin Password sets a password to control access to the administrative features of the server. When this password is set, the administrative features of the server cannot be accessed without the correct password being entered. • Set Power-On Password sets a password to control access to the server during power up. When this password is set, the server cannot be powered up without the correct password being entered. • Network Server Mode is a security feature that protects an unattended network server while allowing it to run after a power interruption. When set to Disabled, the server operates normally. When set to Enabled, the following actions occur: - The local keyboard does not function unless the power-on password is entered. - When a diskette is not in the diskette drive, the power-on password is bypassed, allowing the server to start. - When a diskette is in the diskette drive, the server does not start unless the power-on password is entered locally. NOTE: Network Server Mode cannot be enabled until a power-on password has been established through the Set Power-On Password menu. • QuickLock enables or disables the QuickLock feature. When set to Enabled, the keyboard is locked by pressing the Ctrl+Alt+L keys. The keyboard remains locked until the password is typed in. NOTE: If the password is disabled at the power-on key prompt, the QuickLock password feature remains active until the next time the server is turned on. HP ProLiant ML330 Generation 3 Server Setup and Installation Guide 5-5