HP ML330 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide - Page 79
BIOS Serial Console Menu, Utility Language, NMI Debug Button
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Server Configuration and Utilities • Erase NVRAM/Boot Space Disk enables you to reset the configuration settings to their factory defaults and to erase the boot disk, including the operating system. • Set CPU Corrected is used to indicate that the previously failed processor has been corrected or replaced. • Wake-On LAN enables or disables the WOL feature for all NICs in the server. By default, this setting is Enabled. • NMI Debug Button enables debug functionality when the system has experienced a software lock-up. By default, this setting is Enabled. • Custom POST Message allows you to input a message that can be viewed during POST. • Processor Hyper-Threading allows Intel Hyper-Threading technology to be enabled or disabled. Processor Hyper-Threading delivers two logical processors that can execute multiple tasks simultaneously using shared hardware resources of a single processor. By default, this setting is Enabled. BIOS Serial Console Menu The BIOS Serial Console option allows you to configure the serial port to view POST error messages and run RBSU remotely through a serial connection to the server COM port. The server that you are remotely configuring does not require a keyboard and mouse. For more information about BIOS Serial Console, and a copy of the BIOS Serial Console User Guide, refer to the HP FTP site (ftp://ftp.compaq.com/pub/products/servers/management/smartstart/biosserialconsole.pdf). Utility Language The Utility Language option is used to set the language in which RBSU is displayed. HP ProLiant ML330 Generation 3 Server Setup and Installation Guide 5-7