HP ML330 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide - Page 59
SCSI connector on the SCSI controller, SCSI connector on an optional array controller
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Hardware Options Installation To cable a SCSI device or hard drive: 1. Complete the hardware installation procedure. 2. Connect the end of the SCSI cable to one of the following: - SCSI connector on the SCSI controller - SCSI connector on an optional array controller IMPORTANT: For more array controller cabling information, refer to the documentation that ships with the option. IMPORTANT: HP recommends connecting any non-LVD (single-ended) tape drives or SCSI devices to a separate SCSI cable to avoid a decrease in Ultra2 or Ultra 3 SCSI device performance. A separate SCSI expansion board should be installed to accommodate single-ended drives (drives which are not Ultra2, Ultra 3, or greater). NOTE: The SCSI controller only operates in expansion slot 1. 4-16 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide