HP ML330 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide - Page 49
Install the front bezel. Refer to Server Operations., Install the DIMM
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Hardware Options Installation 2. Install the DIMM: a. Open the DIMM slot latches. CAUTION: A DIMM can be installed only one way or damage will result. Be sure to match the key slot on the DIMM with the tab on the DIMM socket. Push the DIMM down into the socket, ensuring that it is fully inserted and properly seated. b. Insert the DIMM into the slot. c. Close the DIMM slot latches. NOTE: The latches may close automatically when the DIMM is properly inserted. 3. Install the access panel. Refer to Chapter 2, "Server Operations." 4. Install the front bezel. Refer to Chapter 2, "Server Operations." 4-6 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
Hardware Options Installation
2.
Install the DIMM:
a.
Open the DIMM slot latches.
CAUTION:
A DIMM can be installed only one way or damage will result. Be sure
to match the key slot
on the DIMM with the tab on the DIMM socket. Push the
DIMM down into the socket, ensuring that it is fully inserted and properly seated.
b.
Insert the DIMM into the slot.
c.
Close the DIMM slot latches.
NOTE:
The latches may close automatically when the DIMM is properly inserted.
3.
Install the access panel. Refer to Chapter 2, “Server Operations.”
4.
Install the front bezel. Refer to Chapter 2, “Server Operations.”
4-6
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide