HP ML330 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide - Page 78
Server Asset Text, Advanced Options Menu, Service Phone Number Text
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Server Configuration and Utilities Server Asset Text The Server Asset Text menu customizes the server-specific text, including the following: • Set Server Information Text defines reference information for the server, such as Server Name, Server Asset Tag, Server Primary OS, and Other Text. • Set Administrator Information Text defines reference information for the server administrator, such as Admin Name Text, Admin Phone Number Text, Admin Pager Number Text, and Other Text. • Set Service Contact Text defines reference information for the service contact of the server, such as Service Name Text, Service Phone Number Text, Service Pager Number Text, and Other Text. • Serial Number allows you to change the chassis serial number. Advanced Options Menu The Advanced Options menu enables you to configure advanced options of the system. The following selections are available on this menu: • MPS Table Mode is automatically set based on the operating system selected and is used for interrupt routing. By default, this setting is Auto Set Table. • POST Speed Up quickens POST by disabling the extended power-up memory test. By default, this setting is Enabled. • POST F1 Prompt configures the server so that when an error is encountered during the power-up sequence, you must press the F1 key to proceed (Enabled option) or the system pauses 10 seconds before proceeding (Delayed option). The F1 Prompt option can also be Disabled. By default, this setting is Delayed. • Redundant ROM Selection toggles the server ROM between the current ROM and the backup ROM. • Erase Non-volatile Memory resets the non-volatile memory of the server to an initial, factory state. 5-6 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide