HP ML330 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide - Page 42
Configuring the Server, Power up the server. Refer to Powering Up the Server in Server
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Server Setup 7. To select the type of operating system and set the date and time, run ROM-Based Setup Utility (RBSU) by pressing the F9 key when prompted during initial boot. For more information on RBSU, refer to Chapter 5, "Server Configuration and Utilities," or refer to the HP ROM-Based Setup Utility User Guide. 8. Insert the SmartStart CD into the CD-ROM drive and configure the server: - For configuration procedures, refer to "Configuring the Server" in this chapter. - For SmartStart CD initialization procedures, refer to Chapter 5, "Server Configuration and Utilities" or the ProLiant Essentials Foundation Pack that ships with the server. 9. Install the operating system software. 10. Install Insight Manager to manage the server. The software is located on the Management CD. For Management CD initialization procedures, refer to the ProLiant Essentials Foundation Pack that ships with the server. IMPORTANT: To benefit from the Pre-Failure Warranty on processors, hard drives, and memory modules, you must install and use Insight Manager. 11. Install any application software. Configuring the Server RBSU, the server setup utility, can be used to configure the server and options. To initiate RBSU, press the F9 key when prompted during start up. The SmartStart CD contains ROMPaq and updated drivers and assists with the operating system installation. To use the SmartStart CD: 1. Locate the SmartStart CD in the ProLiant Essentials Foundation Pack. 2. Power up the server. Refer to "Powering Up the Server" in Chapter 2, "Server Operations." 3. Press the CD-ROM drive eject button. For button locations, refer to "Front Panel Components" in Chapter 1, "Component Identification." 3-10 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide