HP ML330 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide - Page 93
Array Information, Physical Drive Information - proliant array configuration
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
RAID Configuration and Management The setup screen has three menu windows: • Array Information • Physical Drive Information • Help Information Array Information IMPORTANT: You cannot add drives or remove drives from an array that already has been configured, without destroying the data present on the already configured array. The Array Information window of the setup screen displays all the drive arrays configured. Use this window to create, delete, or edit the existing configurations. Press the up arrow and down arrow keys to navigate the properties, and then press the Enter key to edit your selection. You can create additional arrays in this window. For more information, refer to the HP ProLiant ML330 Generation 3 Server Maintenance and Service Guide. NOTE: To add additional arrays, follow the onscreen steps after an array configuration is selected. Refer to "Help Information" for more information about arrays. Physical Drive Information The Physical Drive Information window displays all the physical drives connected to the ATA/100 controller channels and their properties. Press the up arrow and down arrow keys to navigate this window. This window is not editable. Help Information IMPORTANT: When running the Configuration Utility, you may see RAID 0+1 displayed in place of RAID 1+0. RAID 0+1 and RAID 1+0 are used synonymously in this utility. The Help window displays hints on available options and provides a list of keys that you can use to perform tasks, such as the following: • Switch Windows (Tab)-switches the control back and forth between the Array Information and the Physical Drive Information windows. 6-4 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide