HP ML330 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide - Page 51
Removing a Media Bay Drive Tray, toward each other.
UPC - 613326960790
View all HP ML330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Hardware Options Installation 3. Remove the bezel blank: a. On the back of the front bezel, press the tabs on each end of the bezel blank toward each other. b. Push the bezel blank through the front bezel. To install a bezel blank, reverse the removal procedure. Removing a Media Bay Drive Tray NOTE: The drive trays in the removable media bays can be used to mount internal 3.5-inch devices. The rails mounted inside the drive trays can be removed and used to mount other devices in the removable media bays. When installing a device into a removable media bay, you must first remove the drive tray. 4-8 HP ProLiant ML330 Generation 3 Server Setup and Installation Guide
Hardware Options Installation
3.
Remove the bezel blank:
a.
On the back of the front bezel, press the tabs on each end of the bezel blank
toward each other.
b.
Push the bezel blank through the front bezel.
To install a bezel blank, reverse the removal procedure.
Removing a Media Bay Drive Tray
NOTE:
The drive trays in the removable media bays can be used to mount internal 3.5-inch
devices. The rails mounted inside the drive trays can be removed and used to mount other
devices in the removable media bays.
When installing a device into a removable media bay, you must first remove the drive
tray.
4-8
HP ProLiant ML330 Generation 3 Server Setup and Installation Guide