HP Pavilion a1000 Getting Started Guide - Page 20
Setting up 6-connector sound, Identifying the audio connectors 6-connector - processor
View all HP Pavilion a1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3 Click the Audio tab. 4 Click the option for the number of speakers to match your multi-channel speaker system. NOTE: When using the digital out connector for sound (6-connector, select models only), select Digital (S/PDIF) out to External Processor. 5 Click Apply. NOTE: To test the speakers (multi-channel speakers only), click the Test button. The WinDVD control panel shows the speaker number being used. Click Stop. 6 Click OK. NOTE: If you want to play a stereo DVD, change the audio properties of WinDVD to match the recorded DVD audio output. A Side speaker port (side) B Rear speaker port (rear) C Center speaker/ subwoofer port (c/sub) D Microphone (mic) E Audio line out (out) for front speakers F Audio line in (in) Setting up 6-connector sound PC models that include six sound connectors (select models only) on the back of the PC, support up to eight channels of sound (7.1 speaker output) and use the Sound Effect Manager to configure the software settings. Identifying the audio connectors (6-connector) The PC supports a maximum of eight speakers in a multi-channel speaker system by using four of the six audio connectors on the back of the PC. This PC also has digital audio out and digital audio in connectors for digital sound devices such as a DVD recorder or a digital stereo receiver/amplifier. The four connectors (A, B, C, and E) for the 6-connector multi-channel speaker system are on the back of the PC. A B C D E F 14 Getting Started Guide