HP Point of Sale rp5000 Troubleshooting Guide (2nd Edition) - Page 69
diskette. See the ROM Flash
View all HP Point of Sale rp5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
POST Error Messages Diagnostic Front Panel LEDs and Audible Codes (Continued) Activity Beeps Possible Cause Recommended Action Red Power LED 6 flashes six times, once every second, followed by a two-second pause. PCI video card is not seated properly or is bad, or system board is bad. ✎ The AGP slot is only used for the USB+Power card and is not meant for AGP cards. Only PCI graphics cards can be used in a PCI slot. For systems with a PCI graphics card: 1. Reseat the graphics card. Power on the system. 2. Replace the graphics card with a PCI graphics card. AGP graphics cards are not supported by the AGP slot. 3. Replace the system board. For systems with integrated graphics, replace the system board. Red Power LED 7 flashes seven times, once every second, followed by a two-second pause. System board failure (ROM detected failure prior to video). Replace the system board. Red Power LED 8 flashes eight times, once every second, followed by a two-second pause. Invalid ROM based on bad checksum. 1. Reflash the ROM using a ROMPaq diskette. See the "ROM Flash" section of the Desktop Management Guide on the Documentation CD. 2. Replace the system board. Troubleshooting Guide www.hp.com A-15