HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 107

configShow 2 configShow Displays system configuration settings. Synopsis configshow ["pattern"] | -pattern ["pattern"] configshow -local|-USB|-U [file] [-pattern "pattern"] Description Use this command to display some system configuration settings in addition to the parameters set by the configure command. NOTE Not all values displayed are applicable to all system models and configurations. Operands When this command is executed without operands, all system configuration settings are displayed. The following operands are optional: "pattern" | -pattern ["pattern"] Specify a text string in quotation marks that limits the output of the command to only those entries that contain the pattern. Use of wildcards and other common regular expression operators is not supported. Some configuration settings will not display when filtered. If in doubt, use the command without operands. -local [file] Displays the entire contents of a configuration file that was previously created by configUpload and stored on the chassis. The output can be optionally filtered by -pattern "pattern". If file is omitted, the command will prompt the user to specify a file name. The output format when this option is included exactly matches that of configUpload and contains a superset of the information provided by this command when the option is not specified. -USB | -U [file] Displays the entire contents of a configuration file that was previously created by configUpload and stored on an attached USB device. The output can be optionally filtered by -pattern "pattern". If file is omitted, the command will prompt the user to specify a file name. The output format when this option is included exactly matches that of configUpload and contains a superset of the information provided by this command when the option is not specified. Examples To display the content of the local configuration file: 1. List the file: switch:admin> configlist -local config.txt 92067 2007 Aug 07 03:59 2. Display the file's contents: switch :admin> configshow -local File Name [config.txt]: config.txt [Switch cp7 Configuration uploaded on Aug 07 03:59:55] [FOS-Version: 6.0.0.0] Fabric OS Command Reference 81 53-1000599-01