HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 86

2 cfgRemove cfgRemove Removes a member from a zone configuration. Synopsis cfgremove "cfgName", "member[; member...]" Description Use this command to remove one or more members from an existing zone configuration. If all members are removed, the zone configuration is deleted. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to nonvolatile memory using the cfgSave command. For the change to become in effect, an appropriate zone configuration must be enabled using the cfgEnable command. Notes This command requires a Brocade Advanced Zoning license. When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following operands: "cfgName" Specify a name for the zone configuration, in quotation marks. This operand is required. "member" Specify a zone member or list of zone members to be added to the configuration, in quotation marks and separated by semicolons. This operand is required. Members can be specified in one or more of the following ways: • Zone names • QuickLoop names • FA (Fabric Assist) zone names Examples To remove a zone from a configuration: switch:admin> cfgremove "Test_cfg", "redzone" See Also cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgSave, cfgShow, cfgTransAbort, cfgTransShow 60 Fabric OS Command Reference 53-1000599-01