HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 483

portCfgShow 2 Operands VC Link Init Displays (..)/OFF when the long-distance link initialization option is turned off. Displays ON when it is turned on for long distance mode. This value is set by the portCfgLongDistance command. Locked L_Port Displays ON when port is locked to L_Port only or blank. Displays (..)/OFF when L_Port lock mode is disabled and the port behaves as a U_Port). This value is set by the portCfgLPort command. Locked G_Port Displays ON when port is locked to G_Port only. Displays (..)/OFF when G_Port lock mode is disabled and the port behaves as a U_Port. This value is set by the portCfgGPort command. Disabled E_Port Displays ON when port is not allowed to be an E_Port. Displays (..)/OFF when the port is allowed to function as an E_Port. This value is set by the portCfgEPort command. ISL R_RDY Mode Displays ON when ISL R_RDY mode is enabled on the port. Displays (..)/OFF when ISL R_RDY mode is disabled. This value is set by the portCfgISLMode command. RSCN Suppression Displays ON when RSCN suppression is enabled on the port. Displays (..)/OFF when RSCN suppression is disabled. This value is set by the portCfg rscnsupr command. Persistent Disable Displays ON when the port is persistently disabled; otherwise displays (..)/OFF. This value is set by the portCfgPersistentDisable command. NPIV capability Displays ON when N_Port ID Virtualization (NPIV) is enabled on the port. Displays (..)/OFF when NPIV capability is disabled. This value is set by the portCfgNPIVPort command. It is enabled by default for Condor-based ports and disabled by default for Bloom-based ports. QOS E_Port Displays ON when Adaptive Networking/Quality of Service (AN/QoS) is enabled on an E_port. Displays (..)/OFF when QoS is disabled. By default, QoS is enabled by best effort based on availability of buffers. This value is set by the portCfgQos command. Mirror Port Displays ON when Mirror Port is enabled on the port. Displays (..)/OFF when Mirror Port is disabled. This value is set by the portCfg mirrorport command. FC Fastwrite Displays ON when FC Fastwrite is enabled on the port or (..)/OFF when disabled. Fastwrite is disabled by default. This value is set by the portCfg fastwrite command. The execution of this command is subject to Admin Domain restrictions that may be in place. This command supports the following port options: slot For bladed systems only, specifies the slot number of the port to be configured, followed by a slash (/). [ge]port Specifies the number of the port to be configured, relative to its slot for bladed systems. For GigE ports, the ports are numbered ge0 - ge1. Use the switchShow command for a list of valid ports. Use portCfgshow with one of the following options and optional arguments, to display specific FCIP related parameters configured for a gigabit Ethernet port: Fabric OS Command Reference 457 53-1000599-01