HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 660

2 switchStatusPolicyShow switchStatusPolicyShow Displays the policy parameters that determine overall switch status. Synopsis switchstatuspolicyshow Description Use this command to view the current policy parameters set for the switch. These policy parameters determine the number of failed or non-operational units allowed for each contributor before triggering a status change in the switch. The command displays the current parameters in a three-column format, shown in the table. The first column indicates the contributor, the second column indicates the minimum number that contributes to the DOWN status, and the third column indicates the minimum number that contributes to the MARGINAL status. The parameters can be set by the switchStatusPolicySet command. The existence of policies such as Fans, PowerSupplies, CP, WWN, and Blade might differ from platform to platform. TABLE 20 Default Contributor, Values, and Status Contributor DOWN Default MARGINAL Default PowerSupplies 2 1 Temperatures 2 1 Fans 2 1 WWN 0 1 CP 0 1 Blade 0 1 Flash 0 1 MarginalPorts 2 1 FaultyPorts 2 1 MissingSFPs 0 0 The policy parameters determine the number of failed or non-operational units for each contributor that trigger a status change in the switch. For example, if the FaultyPorts DOWN parameter is set to 3, and three ports fail in the switch, then the status of the switch changes to DOWN. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands none Examples switch:admin> switchstatuspolicyshow The current overall switch status policy parameters: Down Marginal PowerSupplies 2 1 Temperatures 2 1 Fans 2 1 WWN 0 1 CP 0 1 Blade 0 1 Flash 0 1 MarginalPorts 2 1 FaultyPorts 2 1 634 Fabric OS Command Reference 53-1000599-01