HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 131

diagHelp 2 diagHelp Displays diagnostic command information. Synopsis diaghelp [command] Description Use this command to display a short description of diagnostic commands that are available to the user if command is not specified. The command builds a database of command information during the first execution. This process takes a few seconds to complete. Use default operands when running diagnostics commands. Non-default settings require detailed knowledge of the underlying hardware and are intended for support personnel only. Contact support if you want to use these operands. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operand: command Specify a command name to display more detailed information. Examples To display diagnostic command information: switch:admin> diaghelp bladepropshow chippropshow datatypeshow diaghelp diagoktorun diagshow diagstatus display blade properties display chip properties display available diagnostic data types display diagnostic command descriptions check to see if it is ok to run a diagnostic test display diagnostics status display currently running diagnostic tests minispropshow minisregshow ptbufshow (output truncated) display ASIC pair property display contents of ASIC pair registers. dump port buffer contents See Also none Fabric OS Command Reference 105 53-1000599-01