HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 549

portStatsShow 2 portStatsShow Displays port hardware statistics. Synopsis portstatsshow [slotnumber/]portnumber portstatsshow [ge | ip | fcip ] [slotnumber/]geportnumber [ipaddress | tunnelnumber] Description Use this command to display port hardware statistics counters. Some counters are platform and port specific and display only with those platforms and ports. All statistics have a maximum 32-bit value of 4,294,967,295. stat_wtx 4-byte words transmitted. stat_wrx 4-byte words received. stat_ftx Frames transmitted. stat_frx Frames received. stat_c2_frx Class 2 frames received. stat_c3_frx Class 3 frames received. stat_lc_rx Link control frames received. stat_mc_rx Multicast frames received. stat_mc_to Multicast timeouts. stat_mc_tx Multicast frames transmitted. tim_rdy_pri Amount of time that sending R_RDY or VC_RDY primitive signals is a higher priority than sending frames, due to diminishing credit reserves in the transmitter at the other end of the fiber. This is sampled once every 348 106.25 MHz clocks, and the counter is incremented by 1 if the condition is true. tim_txcrd_z Amount of time that frame transmission is blocked by a transmit credit of 0. This is sampled once every 348 106.25 MHz clocks, and the counter is incremented by 1 if the condition is true. er_enc_in Encoding errors inside frames. er_crc Frames with CRC errors. er_trunc Frames shorter than minimum. er_toolong Frames longer than maximum. er_bad_eof Frames with bad end-of-frame. er_enc_out Encoding error outside frames. er_bad_os Invalid ordered set (platform and port specific). er_c3_timeout Class 3 frames discarded due to timeout (platform and port specific). er_c3_dest_unreach Class 3 frames discarded due to destination unreachable (platform and port specific). er_other_discard Other discards (platform and port specific). er_zone_discard Class 3 frames discarded due to zone mismatch. Fabric OS Command Reference 523 53-1000599-01