HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 608

2 shellFlowControlDisable shellFlowControlDisable Disables XON/XOFF flow control on the console serial ports. Synopsis shellflowcontroldisable Description Use this command to disable XON/XOFF flow control on the console serial ports. Flow control is disabled by default. Because this command changes the flow control on the console serial port, it must be executed from a session that is logged in from the console serial port. This command cannot run from a telnet session. This setting saves in the configuration database; therefore, persistent across reboots and power cycles. Notes On dual control processor (CP) systems, a reboot on the standby CP is required for this command to take effect. No action is required on the active CP. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands none Examples To disable flow control: switch:admin> shellflowcontroldisable Disabling flowcontrol flow control is now disabled See Also shellFlowControlEnable 582 Fabric OS Command Reference 53-1000599-01