HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 482
portCfgShow, when the AL_PA Offset is 0x0 default. Displays ON when AL_PA Offset is
View all HP StorageWorks 4/16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 482 highlights
2 portCfgShow portCfgShow Displays port configuration settings. Synopsis portcfgshow portcfgshow [[slot/]port] portcfgshow option [slot/][ge]port [args] [optional args] Description Use this command to display the current configuration of a port. If no operand is specified, this command displays port configuration settings for all ports on a switch, except gigabit Ethernet (GbE) ports. Additionally, use this command with optional arguments to display specific FCIP parameters configured for a gigabit Ethernet port, such as the following: • Address resolution protocol (ARP) entries • IP interfaces on the GbE port • Static routes on the IP interfaces • Fibre Channel over IP (FCIP) tunnel configuration settings - IKE and IPSec policy information - QoS mappings • Port Mode information • VLAN tag configuration The output of this command may vary depending on the hardware platform and port type. The execution of this command is subject to Admin Domain restrictions that may be in place. The following information is displayed when the command is issued for all ports, or for a specific port: Speed Displays 1G, 2G, 4G, 8 GB or AN (when in auto speed negotiation mode). This value is set by the portCfgSpeed command. AL_PA Offset 13 Displays the arbitrated loop physical address (AL_PA) offset. Displays (...)/OFF when the AL_PA Offset is 0x0 (default). Displays ON when AL_PA Offset is 0x13. This value is set by the portCfgAlpa command. Trunk Port Displays ON when port is set for trunking or (..)/OFF when trunking is disabled on the port. This value is set by the portCfgTrunkPort command. Long Distance Displays (...)/OFF when long distance mode is off; otherwise, displays long distance levels as follows: LE The link is up to 10 km LM The link is up to 25 km L1 The link is up to 50 km L2 The link is up to 100 km LD The distance is determined dynamically LS The distance is determined statically be user input This value is set by the portCfgLongDistance command. 456 Fabric OS Command Reference 53-1000599-01