HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 245

firmwareKeyShow 2 firmwareKeyShow Displays the public key used for signed firmware validation. Synopsis firmwarekeyshow Description This command displays the contents of the public key used for validating the integrity of firmware images when signed firmware validation is enabled. Notes A firmware key should be installed on every switch as a part of the Fabric OS installation. The presence of a firmware key does not imply that the firmware signature will be checked during firmwareDownload. Signed Firmware Download must be enabled before the public key can be used for signature validation. Use the configure command to enable Signed Firmware Download. If Signed Firmware Download is enabled, and if the validation succeeds, firmware download will proceed normally. If the firmware is not signed or if the signature validation fails, signed firmware download will fail Refer to the Fabric OS Administrator's Guide for complete details on upgrading or downgrading firmware. Operands .none Examples To display the public key used for signed firmware validation: See Also switch:admin> firmwarekeyshow -----BEGIN PUBLIC KEY----MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDjuQpMk4FrceFvVZ12iAakFNv9 k4ZGhFDMPGIHIems1Ywqdl55U7LTDIVwoViTLevtIDn012r1XlNQ+DORAzvJfkwD XegkeTn/8wDgHBwotPz4WTd9UGJ9M0Vs52ro1TiukIpsh084LXKgxt+IgdseRCzY 8p8rQZWLpyputx6rgwIDAQAB -----END PUBLIC KEY----- firmwareDownload, firmwareKeyUpdate, configure Fabric OS Command Reference 219 53-1000599-01