HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 571

secCertUtil 2 showcsr Displays the contents of the CSR in the switch without page breaks. Use pipe operator followed by "more" option to display the contents of the CSR in the switch page breaks. seccertutil show List certificates seccertutil show file name Display certificate content Examples To generate a public/private key pair: switch:admin> seccertutil genkey Generating a new key pair will automatically do the following: 1. Delete all existing CSRs. 2. Delete all existing certificates. 3. Reset the certificate filename to none. 4. Disable secure protocols. Continue (yes, y, no, n): [no] y Select key size [1024 or 2048]: Generating new rsa public/private key pair Done. To generate a CSR: switch:admin> seccertutil gencsr Country Name (2 letter code, eg, US): State or Province Name (full name, eg, California): Locality Name (eg, city name): Organization Name (eg, company name): Organizational Unit Name (eg, department or section name): Common Name (Fully qualified Domain Name, or IP address): generating CSR, file name is: .csr Done To delete the CSR: switch:admin> seccertutil delcsr WARNING!!! About to delete the switch CSR. ARE YOU SURE (yes, y, no, n): [no] y To import a certificate: switch:admin> seccertutil import Select protocol [ftp or scp]: ftp Enter IP address: ip address Enter remote directory: dir name where certificate is stored Enter certificate name (must have ".crt" or ".pem" suffix): filename Enter Login Name: login Enter Password: password Success: imported certificate [certificate file name]. To import a certificate with configure and enable option: switch:admin> seccertutil import -config swcert -enable https Select protocol [ftp or scp]: ftp Enter IP address: ip address Fabric OS Command Reference 545 53-1000599-01