HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 203

fcrLsanMatrix 2 Examples --cancel --fabricview --verify --quickmode Cancels the data that was not applied; reverts to the persistent information. Views all the static and default/dynamic fabric binding in the backbone. Verifies if the LSAN Zone information previously entered and stored in the cache, can be successfully applied. The data is okay if the apply operation does not cause disruption to the traffic. Derives the LSAN Zone matrix from the import/export setup. The backbone has the following online edge fabrics (FIDs): 1, 2, 4, 5, 7, 8, 10 (currently, 14, 19 are not available). To add the LSAN Zone Matrix data: switch:admin > fcrlsanmatrix --add 4 5 switch:admin > fcrlsanmatrix --add 4 7 switch:admin > fcrlsanmatrix --add 10 14 switch:admin > fcrlsanmatrix --add 10 19 To remove an entry: switch:admin > fcrlsanmatrix --remove 10 14 To display the information from the cache: switch:admin > fcrlsanmatrix --display Fabric ID 1 Fabric ID 2 4 5 4 7 10 19 To apply the changes persistently: switch:admin > fcrlsanmatrix --apply To view the persistent changes: switch:admin > fcrlsanmatrix LSAN MATRIX is activated Fabric ID 1 Fabric ID 2 4 5 4 7 10 19 To view the LSAN Zone static and default/dynamic binding in the backbone: For example, in the backbone where online fabrics are: 1, 2, 4, 5, 7, 8, 10 switch:admin > fcrlsanmatrix --fabricview LSAN MATRIX is activated Fabric ID 1 Fabric ID 2 4 5 4 7 10 19 Default LSAN Matrix: 1 2 8 Fabric OS Command Reference 177 53-1000599-01