HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 582

2 secPolicyCreate "member" Specify a list of members to be included in the security policy. The members must be enclosed in quotation marks and separated by semicolons. Depending on the policy type, members are specified as follows:. DCC_POLICY Members The DCC_Policy_nnn is a list of devices associated with a specific switch and port combination. An empty DCC_POLICY does not stop access to the switch. The device is specified with a WWN string. The switch and port combination must be in the following format: switch port switch can be specified using WWN, domain, or switch name. port can be specified by port numbers separated by commas and enclosed in either brackets or parenthesis: for example, (2, 4, 6). Ports enclosed in brackets will include the devices currently attached to those ports. The following examples illustrate several ways to specify the port values: (1-6) Selects ports 1 through 6. (*) Selects all ports on the switch. [3, 9] Selects ports 3 and 9 and all devices attached to those ports. [1-3, 5] Selects ports 1 through 3 and 5 and all devices attached to those ports. [*] Selects all ports on the switch and devices currently attached to those ports. SCC_POLICY and FCC_POLICY Members This policy type requires member IDs to be specified as WWN strings, domains, or switch names. If domain or switch names are used, the switches associated must be present in the fabric or the command fails. To add all switches in the current fabric as members of the policy, enter an asterisk enclosed in quotation marks "*" as the member value. This feature cannot be used by the other security commands. Examples To create an FCS policy: primaryfcs:admin> secpolicycreate "FCS_POLICY", "3; 4" FCS_POLICY has been created. While creating the FCS policy, the local switch WWN is automatically included in the list. Switches included in the FCS list are FCS switches and the remaining switches in the fabric are non-FCS switches. Out of the FCS list, the switch that is in the first position becomes the Primary FCS switch and the remaining switches become back-up FCS switches. If the first switch in the FCS list is not reachable, the next switch becomes the Primary. To create a device policy to allow two devices to attach to domain 3 ports 1 and 3 (the WWN of first device is 11:22:33:44:55:66:77:aa and the WWN of second device is 11:22:33:44:55:66:77:bb): primaryfcs:admin> secpolicycreate "DCC_POLICY_aB_7", "11:22:33:44:55:66:77:aa;11:22:33:44:55:66:77:bb;3[1,3]" DCC_POLICY_abc has been created. 556 Fabric OS Command Reference 53-1000599-01