HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 79

cfgAdd 2 cfgAdd Adds a member to a zone configuration. Synopsis cfgadd "cfgName", "member[ ;member...]" Description Use this command to add one or more members to an existing zone configuration. This command changes the defined configuration. For the change to be preserved across switch reboots, it must be saved to nonvolatile memory using the cfgSave command. For the change to become in effect, an appropriate zone configuration must be enabled using the cfgEnable command. Notes This command requires a Brocade Advanced Zoning license. When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands This command has the following operands: "cfgName" Specify a name for the zone configuration, in quotation marks. This operand is required. "member" Specify a zone member or list of zone members to be added to the configuration, in quotation marks and separated by semicolons. This operand is required. Members can be specified in one or more of the following ways: • Zone names • QuickLoop names • FA (Fabric Assist) zone names Examples To add two new zones to the configuration "Test_cfg": switch:admin> cfgadd "Test_cfg", "redzone;bluezone" See Also cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow Fabric OS Command Reference 53 53-1000599-01