HP StorageWorks 4/16 Brocade OS Command Reference Manual Supporting Fabric OS - Page 335

isnscCfg 2 isnscCfg Displays or modifies the configuration state of the iSNS client operation. Synopsis isnsccfg --set slot | geport -s server_ip isnsccfg --set -m -s server_ip isnsccfg --reregister isnsccfg --show isnsccfg --clear Description Use this command to display and update the configuration state of the iSNS client daemon. The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: --set Sets the external iSNS server IP address to perform peering to populate the gateaux FC SCSI targets and iSCSI portal. --show Displays the current iSNS client configuration. --reregister Reregisters the iSNS objects. --clear Clears the configured iSNS server. -m Specifies the management port for communication with the iSNS server. slot Specifies the slot number of an iSCSI blade in a chassis. geport Specifies the port number of a GbE port in an iSCSI blade. NOTE: This parameter only supports Brocade FC4-16IP blades in Brocade 48000 directors. -s server_ip Specifies the IP address in dotted-decimal form. Examples To set the IP address of an external iSNS server with an attached GbE port: switch:admin> isnsccfg --set 7/ge0 -s 192.168.131.124 iSNS client configuration updated: peering with iSNS server 192.168.131.124 on slot 7, port ge0 To set an external iSNS server with an attached management port: switch:admin> isnsccfg --set -m -s 192.168.131.124 iSNS client configuration updated: peering with iSNS server 192.168.131.124 on the management port To display the current configuration of the iSNS client daemon switch:admin> isnsccfg --show iSNS client is peering with iSNS server 192.168.250.109 on slot 7, port ge0 Operational Status: Connected to iSNS server. Fabric OS Command Reference 309 53-1000599-01